G4 Remote Control Connection Diagram
FY-G4 is suitable for GoPro 4/GroPro 3+/GroPro 3, also can be compatible
with GoPro LCD backpack and the cameras with the same size
EN
If any comments or suggestions please do not hesitate
to e-mail us directly :
Please visit the official website of Feiyu Tech
to get related information:
www.feiyu-tech.com
Function
Interface
Level Calibration With RC
Awaken immediately
Awaken immediately
Hold the “LEFT”button and
four press the function button
Hold the “RIGHT”button and
four press the function button
slow down the heading
following speed. And then
will enter the standby Mode
Accelerate the heading
following speed. And then
will enter the standby Mode
G4 Remote Control Operation Instructions
G4 Remote Control Instructions (Optional Item)
Remote Control
USB Data Cable For RC
Function
Button
Direction
Button
UP
LEFT
RIGHT
DOWN
Direction
Button
Note: The function button on the Gimbal
will be disabled after connect the G4
Remote Control.
Operation
Double Press The Function Button
Single Press The Function Button
Long Press The Function Button
For 1 Second
Function Explanation
Operation Again
Function Of Operation Again
Heading Follow Mode
Heading And Pitch Follow Mode
Three Press The Function Button
Three Press again
Other operation is arbitrary
Other operation is arbitrary
Other operation is arbitrary
Other operation is arbitrary
Single press again
Single press again
Single press again
Single press again
Inversion Mode
Exit inversion mode to original status
Exit standby mode ,
and awaken immediately
Exit level calibration mode then
enter standby mode, awaken
immediately after single press again
Heading Lock Mode
Long Press The Function Button
For 3 Second
Standby Mode
Four Press The Function Button
Six Press The Function Button
Reset
There are three heading following speed modes for optional: “SLOW” mode,“NORMAL” mode , “FAST” mode.
Default setting is “NORMAL” mode.
Note: Please make sure that Gimbal initialized successfully.
Realize the heading & pitch angle adjustment, mode switching, level
calibration and heading follow speed configuration from a distance
Through connect the G4 Remote Control , the gimbal can make level calibration by G4 RC without connect to the computer.
Six press the function button in succession within any working mode, Gimbal will enter the Level Calibration Mode.
The pitch angle can be adjusted by the“UP”and“DOWN”button, the roll angle can be adjusted by the “LEFT” and “RIGHT” button.
After finish the level calibration , single press the function button on the RC, the Gimbal will exit the level calibration mode then enter the
standby mode and save the parameters automatically.
Single press the function button on the RC again the gimbal will be awakened immediately.
Level Calibration
Angle Control
Hold the “RIGHT” button and four press the function button in succession at the same time, the Gimbal will accelerate the heading
follow speed.
Hold the “LEFT “ button and four press the function button in succession at the same time, the Gimbal will slow down the heading follow speed.
When successfully configurate the heading follow mode the Gimbal will enter the standby mode and save the parameters automatically.
Single press the function button on the RC again the Gimbal will be awakened immediately.
There are three heading follow speed modes for optional: “SLOW” mode, “NORMAL” mode , “FAST” mode.
Default setting is “NORMAL” mode.
Configuration can be done within any working mode.
Heading Following Speed Mode Configurate
Use of G4 Remote Control :
Within the Heading Follow Mode , pitch angle can be controlled by the “UP”and “DOWN”button on the G4 Remote Control.
Heading angle can be controlled by the “LEFT” and “RIGHT” button .
Note: Please make sure that Gimbal initialized successfully.
