FeiYu Tech VIMBLE ONE, Быстрый старт

Страница: 8 / 9

■ Common Operation
1. Shutter Button
Single tap: Take photo/video
Long press: Switch between
video/photo mode
Double tap: Switch the front and rear camera
2.Mode Button
TIP: Unlock the position lock before powering on the gimbal.
2.1 Roll Follow Mode
Single tap function button then the smartphone moves
according to the movements of the handle. Tap again to
quit.
2.2 Power On/Off
Long time press the function button and release it when
you hear the tone.
2.3 Landscape & Portrait Mode Switching
Double click the function button or manually rotate the
smartphone holder (according to the picture below) to
switch between landscape and portrait mode.
Kindly Reminder:
Do not make anti-clockwise rotation in landscape mode,
Do not make clockwise rotation in portrait mode.
3.Focus Button
Slide up and down to adjust focus.
Slide up (T direction): Zoom in
Slide down(W direction): Zoom out
■ Tripod
The tripod is connected to the bottom of the main unit in
a rotating manner. According to the needs of shooting and
storage, choose whether to install it.
■ Specifications
Roll Range: 323°
Theoretical Battery Life: 6h
(For different smartphone you
installed, it's slightly different)
Net gimbal Weight: 186g
(Not including tripod)
Payload: 250g
(Well-balanced)
Adapter Smartphones: iPhone and Android phones
(The width of the phone is between 41~89mm)
Disclaimer
Thanks for using Feiyu Gimbal. The information in this
document affects your safety and your legal rights and
responsibilities. Read the entire document carefully to ensure
proper configuration before use, Failure to read and follow
instructions and warnings in this document may result in
serious injury to yourself or others, or damage to your
products or damage to other objects in the vicinity.
By using this product, you hereby signify that you have read
this disclaimer and warning carefully and that you understand
and agree to abide by the terms and conditions herein. You
agree that you are solely responsible for your own conduct
while using this product, and for any consequences thereof.
You agree to use this product only for purposes that are proper
and in accordance with all applicable laws, rules, and regulations,
and all terms, precautions, practices, policies and guideline
FeiyuTech has made and may make available. FeiyuTech
accepts no liability for damage, injury or any legal responsibility
incurred directly or indirectly from the use of product.
FeiyuTech will not provide any service for any product
obtained from abnormal channels.
Notice
1. Make sure motor spinning is not blocked by external force
when gimbal is power on.
2. DO NOT contact the gimbal with water or other liquid if the
gimbal is not mark waterproof or splash-proof. Waterproof and
splash-proof product DO NOT contact sea water or other
corrosive liquid.
3. DO NOT disassemble the gimbal except marked detachable.
It need send to FeiyuTech after-sales or authorized service
center to fix it if you accidently disassemble it and cause
abnormal work. The relevant costs are borne by user.
4. Prolonged continuous operation may cause the motor
surface temperature to rise, please operate carefully.
5. DO NOT drop or strike the gimbal. If the battery is abnormal,
contact Feiyu After-sales support.
Storage and Maintenance
1. Keep the gimbal out of the reach of children and pets.
2. DO NOT leave the gimbal near heat sources such as a
furnace or heater. DO NOT leave the gimbal inside of a vehicle
on hot days.
3. Please storage the gimbal in dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will
cause damage to the battery core.
5. Never use the gimbal when the temperature is too high or
too low.
■ Smartphone Installation
It is recommended to remove the smartphone case
before installation. Keep the logo of the smartphone
holder upward. Keep the smartphone holder in center.If
the smartphone tilts after installed the smartphone,
please slide the smartphone to left or right to balance.
■ Extend and Reset the Handle
(1) Hold the handle with one hand, hold upper grip
with other hand.
(2) Extending: Pull the extendable bar out to suitable
length (Extendable range 0~183mm).
Reset: Push upper grip to make the extendable bar
down to handle part.
■ Bluetooth Connection
Turn on the gimbal.
Method one: Download and install Feiyu ON App, run
the App, follow the prompts to turn on and connect
with the bluetooth.
Method two: Turn on the smartphone bluetooth,
Connect the gimbal bluetooth in the setting of phone,
e.g. FY_VB01_xx. (If the bluetooth can't be found, please
turn off Feiyu ON App in the background.)
List: Gimbal x1 Micro-USB cable x1