Features:
Supports HDMI 1.4, HDCP 1.4 and DVI 1.0
Maximum data rate 10.2 Gbps
Zero latency transmission
Supported video resolutions: up to 4K 30Hz and 1080p 60Hz
Supported colour formats 8 bit (YUV 4:2:0, 4:2:2; 4:4:4, RGB) as well as 10 bit (HDR10)
Supported audio formats PCM 2.0-7.1, Dolby Digital, Dolby Digital Plus (incl. Atmos),
Dolby TrueHD, Dolby MAT, DTS, DTS-ES, DTS-HD
Selectable EDID from receiver display or local display.
Maximum ranges (shielded cable recommended):
CAT-7/7a/8-Kabel: 70 m for 1080p, 40m for 4K 30Hz
CAT-6/6a-Kabel: 50 m for 1080p, 30 m for 4K 30Hz
Infrared transmission for remote control signals to the player
Power supply of the receiver via network cable (POC)
Dimensions: transmitter 79.6 × 71 × 16.5 mm, receiver 79.6 × 68 × 16.5 mm
Power consumption Transmitter 1.86 W, Receiver 0.87 W
Power supply 12V 1A DC
Safety instructions
Please do not cover the case or install the unit to avoid overheating.
Keep away from heat sources, fire, water and moisture.
Do not place heavy objects on the unit or the connecting cables.
Do not open or drill holes in the casing.
Clean the surface of the unit only with a soft, dry cloth - without cleaning agents, petrol
or similar.
In case of prolonged non-use or malfunction, please disconnect the mains cable.
Service
The unit must be inspected by qualified personnel in the following cases:
Objects or liquids have entered the unit.
The unit does not operate normally or the performance has changed.
The unit has been dropped or the casing is damaged.
In this case, unplug the power cord and do not operate the unit any more. Do not at-
tempt to repair or open the unit yourself. Contact trained service personnel or the seller
or FeinTech, e.g. by e-mail at [email protected]