IR OUT
DC 12V
HDMI OUT
EDID
HDMI IN
CAT
IR IN
CAT
HDMI OUT
1
9
10
12
2
3
4
5
8
Transmitter
Receiver
6
7
11
13
1. HDMI input for connecting a media player or PC (HDMI source).
2. EDID Switch: In the RX position, the EDID of the display connected to the receiver
is used for the external player. This means that the supported audio and video
formats of the display further away are used. In the TX position, the EDID of the
local display is used.
3. HDMI loop-through output for connecting a local display / sound system.
4. Jack socket for connecting the infrared transmitter. This is used to transmit control
commands from the remote control when it is used on the receiver.
5. RJ45 socket for CAT5e/6/7 network cable
6. Green LED lights up when the power supply is active.
7. Yellow LED
- lights up continuously for an HDMI signal with HDCP copy protection
- flashes when there is an HDMI signal without copy protection
- does not light up when no HDMI signal is present
8. Connection for mains adaptor 12 V 1A for power supply of transmitter and receiver
9. HDMI output for connection to a display or AV receiver
10. Socket for connecting the infrared receiver, the received signals of a remote control
are routed to the transmitter
11. RJ45 socket for CAT5e/6/7 network cable
12. Green LED lights up when the power supply is active.
13. Yellow LED
- lights up continuously for an HDMI signal with HDCP copy protection
- flashes when there is an HDMI signal without copy protection
- does not light up if no HDMI signal is present