7
Call-related functions:
Answer a call
When a call is incoming, the ring tone will be heard in the headphones. Press the MFB once to answer the call and use the FeinSound1 as a
headset. Or remove the headphones and answer the call via your mobile phone in normal way.
Reject / ignore a call
To reject / ignore the incoming call, press and hold the MFB for around 2 seconds until a “beep” sound is heard, then release it.
End a call
While speaking, press the MFB once to end the call or end the call via your mobile phone in normal way.
Transfer a Call
While speaking, press the MFB button for 1 second till a beep sound is heard. The call is transfered from your headphones to your mobile
phone. (Please check if your mobile phone has this function.) Repeat the above procedure to transfer the call from your mobile phone to
your headphones.
Re-dial the last number called
In standby status (switched on and connected to the phone, but no audio playback), double press the MFB on your headphones.
IMPORTANT:
The above function is only applicable to mobile phone with Bluetooth hands free profile. Functionality varies depends on the
mobile phone model you have. Please refer to your mobile phone user guide for additional information.
Voice Dialing from your headphones
If your mobile phone is equipped with a voice dialing function, simply press the MFB for around 3 seconds. If you hear a “beep” sound release
the button and use the voice command according to your mobile phone’s specific instructions.
Attention:
Voice dialing function varies: Some smartphones have a reasonable speech recognition. Others need a pre-recorded voice tag
(the person’s name) into your mobile phone prior to using the voice dialing function. Please refer to your mobile phone’s guide.
Music-related functions:
Play / Pause Music
Press the “MFB” to pause when the devices is playing. Press the “MFB” to play when the device is pausing.
When music is playing, the LED stays solid blue.
Next/ Previous track
Long press the button (2) “+” about 2 seconds is for previous track
Long press the button (4) “-” about 2 seconds is for next track
Adjusting the Volume
When you are on the phone or listen to the music:
Press the button (2) “+” once to increase volume. If you hear a “beep” sound you have reached the maximum level.
Press the button (4) “-” once to decrease volume. If you hear a “beep” sound you have reached the lowest volume setting.
Using the 3.5mm Audio Cable:
A 3.5mm audio cable is included for use with multimedia devices that do not have Bluetooth capabilities. You may also use this audio
cable if the FeinSound1’s battery needs to be charged.
Troubleshooting
If you are unable to connect your headphones and your mobile phone, please try the following:
Ensure your headphones are turned off and are properly charged.
Ensure the headphones are paired with your mobile phone.
Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile phone user guide for specific instruction.
Ensure the headphones are within a 10 meter range of your mobile phone and there are no obstructions, such as walls or other elec-
tronic devices in between.
If the above steps do not solve your problem, please recharge the headphones and remove your mobile phone battery for a short time.
