12
en
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the spoke handle
(figure 2).
The hub assembly can be mounted on either
side.
Loosen the screw using a hex key.
Remove the spoke handle.
Mount the spoke handle on the other side
and tighten the screw using a hex key.
WARNING
Fig. 2
2.
1.
3.
4.
OBJ_BUCH-0000000281-001.book Page 12 Tuesday, July 4, 2017 11:42 AM
