M
ULTI
M
ASTER
FMM 250 / M
ULTI
M
ASTER
FMM 250 Q
3
EN
For your safety.
Only carry out such operations with this
power tool as intended for by FEIN. Only
use application tools and accessories that
have been released by FEIN.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual, includ-
ing the figures, specifications, safety regula-
tions and the signs indicating DANGER,
WARNING and CAUTION.
Please also observe the relevant national
industrial safety regulations.
Non-observance of the safety instructions
in the said documentation can lead to an
electric shock, burns and/or severe injuries.
This Instruction Manual should be kept for
later use and enclosed with the power tool,
should it be passed on or sold.
WARNING! Read all instructions.
SAVE THESE INSTRUCTIONS
1) Work area safety
a)
Keep work area clean and well lit.
Clut-
tered or dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the
dust or fumes.
c)
Keep children and bystanders away while
operating a power tool.
Distraction can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools.
Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b)
Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators.
There is
an increased risk of electric shock if
your body is earthed or grounded.
c)
Do not expose power tools to rain or wet
conditions.
Water entering a power tool
will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Dam-
aged or entangled cords increase the
risk of electric shock.
e)
When operating a power tool outdoors,
use an extension cord suitable for out-
door use.
Use of a cord suitable for out-
door use reduces the risk of electric
shock.
3) Personal safety
a)
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment
of inattention while operating power
tools may result in serious personal in-
jury.
b)
Use safety equipment. Always wear eye
protection.
Safety equipment such as
dust mask, non-skid safety shoes, hard
hat, or hearing protection used for ap-
propriate conditions will reduce per-
sonal injuries.
c)
Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in.
Carrying power tools with your
finger on the switch or plugging in
power tools that have the switch on in-
vites accidents.
3 41 01 091 21 0.book Seite 3 Dienstag, 24. Juli 2007 3:32 15
