KBB 38 X
7. Fitting
C-SC_CSSM Version
1.0 2015-08-25
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
48
of
56
Setting the dove-tail guide
1. Tighten the stop screw (1).
2. Move the drill motor up and down with the spider (2).
The drill motor must not jam or move down of its own accord.
If the drill motor jams or moves down of its own accord, continue with step two.
3. Loosen the screws (3) of the guide plate.
4. Install the screws (3) of the guide plate.
5. Move the drill motor up and down with the spider (2).
Repeat steps two to four until the drill motor moves up and down correctly.
Tools:
- Socket head wrenches
4 mm; 5 mm
3
2
1
