Fein GRIT GIM, Инструкция по эксплуатации

Страница: 11 / 60

GIM
11
EN
Adjusting the lowering/lifting force
(Figure 8).
➤ The required lowering/lifting force can be
adjusted with the crank (23).
➤ Adjust the lowering/lifting force in such a
manner that the belt grinder can be lowered
easily and is held automatically in the upper
position when tilting upward or during work
breaks.
Adjusting the parallelism (Figure 9).
For a uniform rate of removal, it is required that
the sanding/grinding belt runs parallel to the sur-
face.
➤ Adjust the run of the belt with the star-knob
bolt (19).
Operating instructions.
Switch the machine on or off only via the
On/Off switch of the belt sander. The
“
I ” button on the electrical switchbox (18)
must always be pressed. The switch on the
electrical switchbox is only a safety switch
(emergency OFF pushbutton)!
Switching ON:
➤ Release the safety switch (14) and fold it up.
Press the “
I ” (15) button.
Switching OFF:
➤ Release the safety switch (14) and fold it up.
Press the “
0 ” (15) button.
After switching off, the machine runs on
for approx. 50 seconds.
Safety switch (emergency OFF switch):
➤ In emergency situations, press the red safety
switch (emergency OFF switch) (14) to
switch the machine off.
Working instructions
➤ Move the wheeled carriage to the working
location.
➤ Switch the belt grinder on and pull the han-
dle bar lever to the working position.
➤ Move the belt grinder along the surface to be
ground with uniform speed.
➤ After finishing the working procedure, tilt
the handle bar upward and switch the belt
grinder off.
Repair and customer service.
Repairs may be carried out only by quali-
fied persons in conformity with the valid
regulations.
For repairs, we recommend our FEIN customer
service centre, the FEIN authorised service cen-
tres and FEIN agencies.
Warranty and liability.
The warranty for the product is valid in accord-
ance with the legal regulations in the country
where it is marketed.
In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer’s guar-
antee. For further details on this, please contact
your specialist dealer, your national FEIN repre-
sentative, or the FEIN customer service centre.
Environmental protection, disposal.
Stationary machines should be sorted for envi-
ronment-friendly recycling in accordance with
national laws.
Specifications.
Connection diagrams.
Type GIM Appendix 60
Type GIM
Weight according to
EPTA-Procedure 01/2003
35 kg
Class of protection I/
3 94 10 014 000 - Buch Seite 11 Mittwoch, 16. August 2006 1:26 13