Saugen
Assembly
C-SC_CSSM
Version 1.0
10.12.2019
Page
39
of
45
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Fitting the electronics (FEIN Dustex 25 L; FEIN Dustex 35 L)
Steps that must be completed:
-
Fit the base plate
-
Fit the motor
-
Fit the mains cable
-
Fit the housing
N
OTE
!
Damage from electrostatic charge.
Failure to comply with the safety regulations for ESD
protection may cause damage to the electronics.
Only perform assembly/disassembly work on electronics at a
workstation with ESD protection.
1.
Connect the cables (
1
).
I
NFORMATION
Ensure that the connection diagram is observed.
2.
Position the electronics (
2
).
1
2
