Fein AMM 500 Plu, Руководство пользователя

Страница: 16 / 181

16
en
For your safety.
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed “General
Safety Instructions” (document number
3 41 30 465 06 0). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Intended use of the power tool:
Hand-guided oscillator for sanding small surfaces, cor-
ners and edges, for sawing thin parts of steel sheet,
wood and plastic, for scraping, polishing, rasping, cut-
ting and separating without water in weather-protected
environments, using the application tools and accesso-
ries recommended by FEIN.
Special safety instructions.
Hold power tool by insulated gripping surfaces only,
because the cutting tool could cut into the machine's
power cord.
Contact with a “live” wire make exposed
metal parts of tool “live” and shock the operator.
Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform.
Holding the
work by hand or against your body leaves it unstable
and may lead to loss of control.
Do not use accessories which are not specifically
designed and recommended by the power tool manu-
facturer.
Safe operation is not ensured merely because
an accessory fits your power tool.
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Charger type
Low oscillation rate
High oscillation rate
Maximal allowed oscillation rate
(**) may contain numbers and letters
(Ax – Zx) Marking for internal purposes
Symbol, character Explanation
Character Unit of measure-
ment, international Unit of measure-
ment, national Explanation
U
V V Rated voltage
n
S
/min, min
-1
, rpm,
r/min
/min Rated oscillation rate
° ° Oscillation angle
kg kg Weight according to EPTA-Procedure 01
L
pA
dB dB Sound pressure level
L
wA
dB dB Sound power level
L
pCpeak
dB dB Peak sound pressure level
K... Uncertainty
m/s
2
m/s
2
Vibrational emission value according to
EN 62841 (vector sum of three directions)
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
Basic and derived units of measurement from
the international system of units
SI .
WARNING