AFSC 1.7Q; AFSC 18QSL
7. Fitting
C-SC_CSSM
Version 1.0
2017-05-08
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
24
of
33
Fitting the tool head
1. Place the pressure piece (1) in the correct position.
2. Push the cable (2) through the housing.
3. Solder the cables (3) as shown in connection diagram.
4. Bend the cables inwards.
Arrange the cables in the following order: Red, green and blue.
The cables should not protrude beyond the field coil.
5. Push on the protective hose as far as the connection for the blue cable.
Tools:
- Soldering station
1
2
3
