AFSC 1.7Q; AFSC 18QSL
7. Fitting
C-SC_CSSM
Version 1.0
2017-05-08
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
22
of
33
Fitting the tool head
1. Position the locking spring (1).
2. Screw in the fillister head screw (2) [2.0
±0.1
Nm].
3. Fit two bushes (3).
Press in bushes until they are flush with the inside.
4. Insert the eccentric ring (4) into the lever (5) in the correct position.
5. Position the lever (5).
6. Press in the straight pin (6).
Tools:
- Assembly aid
- Vice
- Punch 5 mm
- Punch 6 mm
- Torx T20
4
5
2
1
3
6
5