ABLS 1.6E; ABLS 18 1.6E
7. Assembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
25
of
26
Installing the motor/field coil
1. Attach and fasten the upper section of the housing (1).
2. Screw down intermediate flange with the four screws (2).
3. Attach the housing with the tool head (3) to the intermediate bearing.
4. Fasten the housing with tool head using the two screws (4) [5 ±0.2Nm].
5. Insert the pressure piece (5).
6. Perform function check.
Tool:
- 4mm hex key
- Torx 15
1
5
3
4
2