ABLS 1.6E; ABLS 18 1.6E
7. Assembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
18
of
26
Assembling the housing
1. Fix the hand guard (1) on the housing with the fillister head screw (2) [5Nm].
2. Insert the parts (3) into the housing, as shown in the fourth image.
Make sure that the cut-out (4) is positioned on the plunger.
3. Fill the housing with 12 g of grease.
4. Plug the eccentric shaft (5) into the grooved ball bearing in the housing and insert the shim [h=0.15].
Tool:
- Torx T25
- Grease
(0 40 101 0100 4)
2
3
1
4
5