Fein 9 26 04 073 01 4, Руководство пользователя

Страница: 10 / 74

10
en
If the battery is not going to be used
for a longer period, pull the battery
off the battery charger and pull out
the mains plug.
Cover the contacts of the battery over
during storage if it is not in the battery
charger.
A short caused by metallic
bridging-over can cause a fire or explo-
sion!
Do not rivet or screw any name-
plates or signs onto the device. The
protective insulation can thereby be
rendered ineffective. Adhesive labels
are recommended.
A damaged mains cable may only be
replaced by the Fein customer service
centre, or specialised repair centres
under contract.
Using accessories that have not been
recommended or sold by Fein can
cause fire, an electric shock or per-
sonal injury.
Only charge Original Fein batteries.
Damage to property/material
Mains voltage must correspond with
the voltage specifications on the
device.
Symbols, abbreviations and terms used.
Overview.
1 LED display
For indicating the operating modes,
Green lamp (a),
Red lamp (b).
2 Battery-charging interface
Push on battery.
3 Mains cable with mains plug
Do not pull the mains plug out of the socket by pull-
ing at the mains cable.
4 Applications
Battery interface “Trade” (c).
Handling.
➤
Plug in the battery charger without the battery
inserted. The red LED display (b) illuminates, signal-
ising that it is ready for use.
➤
Push on the battery.
➤
The green flashing lamp (a) and permanent red
lamp (b) signalise that the charging procedure is in
progress.
➤
The end of the charging procedure is indicated by a
permanent green lamp (a).
➤
If the red lamp (b) flashes, please observe the follow-
ing instructions.
Instructions.
The charging procedure is additionally control-
led by a temperature sensor in the battery pack.
The charging procedure is adjusted to the
respective battery cell type (NiCd/NiMH) by a
special coding.
The temperature sensor in the battery ensures that fast-
charging does not take place for battery temperatures
below +5 °C and above +40 °C.
If the battery has reached too high a temperature during
the previous discharging process, or if it was stored in
too cold a place (red flashing LED display), the fast-charg-
ing automatically starts as soon as the battery tempera-
ture lies within the charging temperature range.
Symbol Explanation
V Volt
Ah Ampere-hour
Make sure to read the enclosed docu-
ments such as the Instruction Manual
and the General Safety Instructions.
Product with double or reinforced
insulation
Time-lag device fuse, whereby X rep-
resents the character for the time/
power characteristic acc. to IEC 60127.
Use the device only in rooms and do
not subject it to rain.
!
X
Confirms the conformity of the power
tool with the directives of the Euro-
pean Community.
Worn out power tools and other elec-
trotechnical and electrical products
should be sorted separately for envi-
ronment-friendly recycling.
Direct current
Dangerous voltage
Warning! Electrical voltage
Symbol Explanation