13
en
Aligning the angle head
(ASW 14-6 PC, ASW 14-10 PC,
ASW 14-14 PC , ASW 14-6, ASW 14-10,
ASW 14-14) (figure 6).
Loosen the clamping sleeve and turn the angle
head to the desired working position.
Retighten the clamping sleeve.
Aligning the angle head
(ASW 14-30 PC) (figure 7).
Counter-hold the angle head and loosen the
lock nut using two open-end wrenches; turn
the angle head to the desired working posi-
tion, hold it in place and tighten the lock nut
again using the open-end wrenches.
Changing the tool (figure 8).
Push the sleeve of the tool holder toward the
front.
Insert the application tool and release the
sleeve.
Fig. 6
2.
3.
1.
Angle head
Fig. 7
Angle head
4.
1.
2.
3.
3.
Fig. 8
Application tool
Sleeve
OBJ_BUCH-0000000157-002.book Page 13 Tuesday, February 17, 2015 1:44 PM
