VEK FG2-1
operating instructions
FEIG ELECTRONIC GmbH
12/99
13
6 Safety- and danger instructions
•
The appliance shall only be used for the purpose intended by the manufacturer.
•
The operating instructions are to be handed out to every user and should be stored in an easily accessible
place.
•
Improper changes as well as the use of spare parts and accessories, that are not sold or recommended
by the manufacturer of the appliance, may cause fire, electric shock and injuries. Such measures
therefore lead to nonliability and the manufacturer does not grant any guarantee.
•
For this appliance, the manufacturer’s guarantee clauses apply in the version valid at the time of
purchase. The manufacturer may not be held liable for improper or wrong manual or automatic
adjustment of parameters resp. improper use of the appliance.
•
Repair work should only be carried out by the manufacturer.
•
Connection, initiation, maintenance, measurement and adjustment of the traffic detector should only be
carried out by electricians with special knowledge regarding accident prevention.
•
When handling appliances which come into contact with electricity, the current VDE-rules have to be
observed - especially VDE 0100, VDE 0550/0551, VDE 0700, VDE 0711, VDE 0860, VDE 0105 as well as
the fire- and accident prevention rule VBG4.
•
The extinguishing of an operation indicator is no proof that the appliance is disconnected and idle.
•
All works carried out on the appliance as well as its installation have to be done in compliance with the
national electric regulations and local prescriptions.
•
The user is responsible for the correct mounting and connection of the appliance according to the
technical regulations of the country of installation as well as other regional prescriptions. Special attention
should be paid to cable dimensions, fuse protection, earthing, cutoff, disconnection, ground testing and
excess current protection.
