OBID
i
-scan
Montage
ID ISC.PRH100-A/-USB
FEIG ELECTRONIC GmbH
Seite 11 von 29
M10501-3de-ID-B.doc
D E U T
S C H
3. Bedien- und Anzeigeelemente
3.1. LED
Die LED des Readers kann per Software konfiguriert werden.
Tabelle 4.1-1 zeigt die Standard-Konfiguration der LED.
Kurzzeichen
Beschreibung
LED grün
"RUN "
-
Signalisiert den ordnungsgemäßen Ablauf der
internen Reader-Software.
-
Leuchet, wenn der Reader betriebsbereit ist.
LED rot
„LABEL“
-
Leuchtet, wenn ein Label erkannt wird.
LED orange
„INITIALISIERUNG“
- Blinkt während der Reader-Initialisierung nach dem Einschal-
ten.
Fig. 3:1: Standard-Konfiguration der LED
3.2. Summer
Der Summer des Readers kann per Software konfiguriert werden.
In der Standard-Konfiguration wird der Summer aktiv, wenn ein Label erkannt wird.
3.3. Taster
Der Taster des Readers kann per Software konfiguriert werden.
In der Standard-Konfiguration wird nach dem betätigen des Tasters die Seriennummer der im Feld
befindlichen Labels eingelesen.