MWD BPC-H / MWD BPC-HU
List of the service parameters
EN
FEIG ELECTRONIC GmbH
43/74
MWD_BPC-H-HU_ver4_Manual_rev0_mul
P.
[Unit]
Range
Function
Description/ Note
L.662
L.762
L.862
L.962
Software version
Motion detector
This Parameter shows the software version of Motion
detector.
L.664
L.764
L.864
L.964
Hardware version of
Motion detector
This Parameter shows the Hardware version of Motion
detector.
L.66A
L.76A
L.86A
L.96A
0 ... 1
Behaviour in case of
error Motion detector
This parameter is used to configure the behaviour of the
control input to which channel 1 of the motion detector is
connected when it detects an error in the motion detector.
0:
Input is actived
1:
Input remains inactive
L.66B
L.76B
L.86B
L.96B
0 ... 1
Behaviour in case of
error Motion detector
This parameter is used to configure the behaviour of the
control input to which channel 2 of the motion detector is
connected when it detects an error in the motion detector.
0:
Input is actived
1:
Input remains inactive
7.1.1
Motion detector, channel 1
Table 8: Motion detector, channel 1
P.
[Unit]
Range
Function
Description/ Note
L.620
L.720
L.820
L.920
1 ... F
Sensitivity
This parameter defines the sensitivity for the channel to be
parameterized.
1: low … F: high
L.621
L.721
L.821
L.921
0 ... 2
Direction detection
This parameter specifies wether the motion detector reacts
to approaching or departing objects.
0:
deactivated
1:
approaching
2:
departing
If the vehicle or human filter is activated, only
directional detection direction is permitted. Changes to
the setting "detection direction" will be blocked.