Installation Manual ID RW24.ABC-A
FEIG ELECTRONIC GmbH
Page 23 of 32
E N G L I S H
3.1 X1: Antenna
The length of the supply line and the cable type to the antenna can not be chosen free. The supply
line must be qualified for energy- as well as RF signal transmission.
The following references should be considered:
•
Recommended cable type: Telephone outdoor cable A-2Y(L)2Yb2Y with 2 twin wires and a line
diameter of 0,8 mm (VDE 0816).
•
Maximal supply line lenght to the antenna must not exceeded for 5 m.
•
The supply line must have a distance to parallel applied, live cables of at least 30 cm.
•
If the supply line lead through soil, routing in a protective tube is recommended.
•
The antenna signal and the power supply should use the same cable-bundle.
•
Please note the connection of the PE to the antenna frame (separate line) and the connection
between -Sig and PAA on the ID RW24.ABC-A!
Terminal
Code
Description
1
PAA
Functional earth for the antenna signal.
With an link connect to Sig.
(ATTENTION !!! No protection earth function.)
2
GND
GND of the power supply for the antenna tuner
3
U+
+ the power supply for the antenna tuner
4
to Sig
GND for the antenna signal
5
+Sig
Antenna signal
ID RW24.ABC-A
GND
U+
-Sig
+Sig
X1
GND
U+
-Sig
+Sig
PAA
2
3
4
5
1
X1
ID AT-A
Antennacabinet
(only antenna with rack of metal)
PE
PE
(on mounting plate)
