Feig Electronic cVEND PIN, Руководство пользователя

Страница: 21 / 40

5 Connectors
Page 19 of 38
5.3 Connector X2
– USB Device Interface
At connector X2 a USB device interface is provided where a USB host can be connected. The cVEND PIN is
designed as a self-powered device. Power supply via USB interface is not possible.
Pin Label Direction
1 DEV-V
CC
I
2 DEV-D
–
I/O
3 DEV-D+ I/O
4 N.C. -
5 GND -
6 Shield -
Table 6: Pin Assignment USB Connector (X2)
Required Connector:
The fitting complement for this connector consists of a 6-pole plug type Molex Micro Fit and the appending
crimp contact.
Manufacturer Ordering Code:
•
Molex 43025-0600
Plug, 6-pole, grid dimension 3.0 mm, dual row, Molex Micro Fit housing
•
Molex 43030-0001
Crimp contact, female, grid dimension 3.0 mm, AWG#20-24, Molex Micro Fit

NOTE:
The USB interface is designed for max. 3 m (9.8 ft) cable length.
Fig. 12: Connector X2
– USB Device