17. Make sure to use a blade adapted to the material to be cut. Read and compare the
information in this manual with the information on the saw blade.
18. Use only blades that are marked with a speed equal to or greater than the speed on the
tool.
19. Use only blade diameter(s) in accordance with the markings;
20. Double check to make sure that accessories (including blade protection) and
attachments are properly attached. Run a no-load test for one minute to detect any
problems.
21. Fix the piece to be cut. The workpiece is secured more securely if it is held by a clamp
or vice rather than by hand.
22. If the blade gets stuck, turn off the tool immediately and get ready: a high reaction
torque may cause a rebound. The blade gets stuck when the tool is overloaded or stuck
in the room.
23. When using, always use a dust collection system.
24. Avoid overheating the ends of the blades.
25. Do not use abrasive wheels
26. Use only saw blades recommended by the manufacturer, which conform to EN 847-1.
Intended use
This tool is designed to cut wood that will fit the machine. Only use saw blades
suitable for the machine and do not use cutting discs.
09
