background image

If the dust collection box is full, you can remove it from this tool and open the cover of box, empty dust, 
wood bust, etc. in the body, finally clean the dust collection box. 

WARNING: Please empty the dust collection box frequently, after completion of sanding and before 

storing the sander. 

 

Be extremely careful of dust disposal; materials in fine particle form may be explosive. Do not throw 
sanding dust on an open fire. Combustion from mixtures of varnishes, lacquers, polyurethane, oil or water 
with dust particles can occur if there is a static discharge, spark introduced in the box, or excessive heat.

 

 

ATTACHING TO A VACUUM CLEANER 

WARNING: The tool must be turned off before connecting to a vacuum hose.

 

Users can directly attach the vacuum hose to the dust extraction port 
1)

 

Remove the dust box from the sander. 

2)

 

To insert, slide the vacuum hose into the dust extraction port. 

USING THE SANDER 

1)

 

Secure the work to prevent it from moving under the sander. 

2)

 

Hold the sander in front and away from you, keeping it clear of the workpiece. 

3)

 

Switch on the sander and let the motor build to its maximum speed before contacting the workpiece.. 

4)

 

Gradually lower the sander on the work with a slight forward movement. Move it slowly using forward 
and backward strokes. 

5)

 

Always remove the sander from the workpiece before turning the sander off. 

TOOL TIPS 

If the surface is rough, begin with coarser grits and then complete the surfacing with medium and fine 
abrasives. To avoid uneven results, do not skip more than one grit size when going from coarser to finer 
grits, and do not sand in one area for too long. 

NEVER FORCE THE SANDER.

 The weight of the sander supplies adequate pressure so let the sandpaper and 

the sander do the work. Applying additional pressure only slows the motor, rapidly wears the sandpaper 
and greatly reduces the sander speed. Excessive pressure will overload the motor causing possible damage 
from motor overheating and can result in inferior work. 

8

Содержание FPV260















Отзывы: