HANDLE EXTENSION ASSEMBLY
Depending on the different grinding positions, the length of the machine can be adjusted between
1100-1800mm. Turn the lock nut counter clockwise to loosen, pull the hose to the correct length and
then turn the lock nut clockwise to lock.
SANDING OF GYPSUM JOINTS
The Drywall Sander has a special sanding head: the head can rotate in multiple directions, allowing
the abrasive pad to adjust to the work surface. This enables the operator to sand the top, middle and
bottom of a wall or ceiling joint without changing its position.
1). Turn the vacuum cleaner switch to the ON position.
CAUTION:
Wear an approved respirator for mist and dust.
2). Turn the wall sander switch to the ON position.
3). Place the wall sander slightly against the work surface (apply a slight pressure to align the
sanding head with the work surface).
4). Apply additional pressure to push the abrasive pad towards the working surface, while moving
the sander creating an overlapping pattern to smooth the drywall to the edges.
Apply ONLY enough pressure to keep the abrasive pad flat against the working surface. Excessive
pressure can cause unacceptable micro scratches and damage the uniformity of the working
