Feider Machines FPG710-SH, Инструкция по эксплуатации

Страница: 8 / 24

8
b. Never place your hand near the rotating accessory.
Accessory
may kickback over your hand.
c. Do not position your body in the area where power tool will
move if kickback occurs.
Kickback will propel the tool in direction
opposite to the wheel’s movement at the point of snagging.
d. Use special care when working corners, sharp edges etc. Avoid
bouncing and snagging the accessory.
Corners, sharp edges or
bouncing have a tendency to snag the rotating accessory and cause
loss of control or kickback.
e.
Do not attach a saw chain woodcarving blade or toothed saw
blade.
Such blades create frequent kickback and loss of control.
Additional safety instructions for sanding operations
Safety warnings specific to sanding operations
a) Do not use abrasive paper that is too oversized for the sanding discs.
Follow the recommendations of the manufacturers, when choosing the
sandpaper.
Larger sandpaper extending beyond the sanding pad presents a
laceration hazard and may cause snagging, tearing of the disc, or kickback.
Warning symbol
WARNING - To reduce the risk of injury, user must read instruction manual.
Always wear ear protection.
Always wear goggles.
Always wear a breathing mask.
In accordance with essential applicable safety standards of European
directives.
Class II product.
Residual risks
Even if you use this product in accordance with all safety requirements, the potential
risks of injury and damage remain. The following risks may arise in the structure and
design of this product. Always be vigilant when using this product, so you can
recognize and manage the risks rather.
There are harmful health consequences resulting from the emission of vibrations if the
product is used for long periods or is not properly managed and properly maintained.