Feider Machines FM20V115-A, Оригинальное руководство пользователя

Страница: 5 / 20

NOTE The temperature
„130 °C“ can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
and your hand or arm may be pulled into the spinning accessory.
k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged
give the operator an electric shock.
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could
cutting accessory may contact hidden wiring or its own cord.
j) Hold the power tool by insulated gripping surfaces only, when performing an operation where the
injury beyond immediate area of operation.
personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause
i) Keep bystanders a safe distance away from work area. Anyone entering the work area must wear
hearing loss.
filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause
stopping flying debris generated by various operations . The dust mask or respirator must be capable of
capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of
safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron
h) Wear personal protective equipment. Depending on application, use face shield, safety goggles or
Damaged accessories will normally break apart during this test time.
of the rotating accessory and run the power tool at maximum no-load speed for one minute.
After inspecting and installing an accessory, position yourself and bystanders away from the plane
wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory.
for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked
g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels
excessively and may cause loss of control.
Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate
mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange.
f) Threaded mounting of accessories must match the grinder spindle thread. For accessories
your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
e) The outside diameter and the thickness of your accessory must be within the capacity rating of
power tool. A ccessories running faster than their rated speed can break and fly apart.
d) The rated speed of the accessory must be at least equal to the maximum speed marked on the
operation.
manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe
c) Do not use accessories which are not specifically designed and recommended by the tool
hazard and cause personal injury.
performed with this power tool. Operations for which the power tool was not designed may create a
b) Operations such as sanding, wire brushing, polishing and cut-off tool are not recommended to be
below may result in electric shock, fire and/or serious injury.
illustrations and specifications provided with this power tool. Failure to follow all instructions listed
a) This power tool is intended to function as a grinder. Read all safety warnings, instructions,
Operations:
Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive Cutting-Off
2.2 SAFETY INSTRUCTIONS FOR ALL OPERATIONS
05