Feider Machines FHNVM1200, Руководство пользователя

Страница: 8 / 20

4. OPERATION
1. Put the steam cleaner on the platform and open the safety cap.
2. Use the measuring cup and funnel to fill the water. Maximum volume is 400ml. We suggest
you only fill water 300-350ml to get the dry steam. If more than 350ml water, there may some
water in the steam at the first 2 minutes.
Special attention:
- Please use clean water (small solid particles may block pipe or make machine failure)
-
Please do not pour any chemicals such as alcohol, cleaning agents into the steam cleaner.
(some chemical solvents can easily cause machine failure, and even endanger the user's
personal safety in serious cases).
-
If the tap water in your area is very hard, it is recommended that you mix the tap water with
distilled water. Otherwise, the steam cleaner could calcify prematurely and clog the steam
nozzle.
-
Please do not add water less than 150ml.
-
Close the safety cap anticlockwise.
-
Insert the mains plug into the socket, the red light will light up indicate heating.
As soon as the steam cleaner is operational, the green indicator light will on. The red indicator
light will on/off during usage.
Attention:
-
Only use the product once the green indicator light On at the first time. Otherwise, hot water
that drips or sprays.
-
Turn the children lock to “on” position, then press the steam trigger. Steam will be released
directly. Remember you should always press the steam trigger. Once you released the steam
trigger, the children lock will turn back
to “OFF” position auto and steam stopped.
Attention:
If there is no more water in the water tank, no more steam will be emitted when you push the
steam trigger. The water must be refilled as follows:
-
Pull the main plug out of the socket.
-
Push the steam trigger until no more steam is escaping.
- Wait for cooling at least 12-18 minutes.
-
Slowly unscrew the safety cap and wait a few seconds
-
Slowly refill the water tank with water.
- Close the safety cap again.
If the tap water in your area is very hard, it is recommended that you mix the tap water with
distilled water. Otherwise, the steam cleaner could calcify prematurely and clog the steam nozzle.
8