Feider Machines FHNVM1200, Руководство пользователя

Страница: 10 / 20

4) Nylon and stainless brush
Insert the big nozzle into the notch of the round brush (below picture 1), and turn it clockwise
until it clicks.
After use, take out the round brush by turn it anti-clockwise.
To disconnect the nozzle, press the release button on the device and then remove the nozzle.
5) Extension tube
If some areas are difficult to access or if the appliance is used to clean the floor or glass
surfaces, use the extension cords provided. Connect the end of the extension cord to the
outlet of the appliance. You don't have to put on all three extensions at the same time.
To disconnect extension cords and accessories, press the release button to remove the
extension cords and accessory.
6) Floor brush (floor brush towel)
Connect the floor brush connector to the floor brush. Then connect one or more extension
cords to the device. Finally, connect the floor brush to the extension cord.
To install a mop, open the clips on both sides of the floor brush and attach the mop.
10