Feider Machines FDL125, Руководство пользователя

Страница: 18 / 25

LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade lubricant for the
life of the tool under normal operating conditions. Therefore, no further lubrication is required.
LUBRICANT INSTRUCTIONS (Fig 1, Fig 2, Fig 3)
The blades are equipped with Dry Cut teeth. As a rule these need not be lubricated. However, in
extreme cutting conditions, cutting paste can be applied.
When cutting Aluminum/Copper/Stainless steel and cast iron, the lubricating device must always
be used. Identify the lubrication unit next to the laser guide as Fig 1.
Position the wax stick on to lubrication unit as in fig 2.
Before always starting a cut lower the Lubrication stick on to saw blade by turning the knob as in
Fig 3. We recommend that you buy Lubrication stick available from your nearest dealer.
IMPORTANT! The lubricating stick is added by turning the Feed wheel.
Fig 1 Fig 2 Fig3
18