Feider Machines FCBE350, Инструкция по эксплуатации

Страница: 16 / 22

16
TWO-PIECE TUBULAR HANDLES ASSEMBLY(FIG
．
2)
1. Push both parts of the tubular shaft together(hole in the top of the lower
tubular shaft up)
You will hear a click(A)
2. Fold the protective plate(B)and tighten the screw cap to the right direction
3. Before each starting of the machine check, if the Lower tubular shaft firmly
and securely seated.
Before starting machine make sure that the Iower tube spindle firmly and
securely fits and that
it is in the correct position
．
Disassemble
For removal the screw cap on the left side
Lift the protective plate
，
pressing unlock the locking latch and slide the lower
tubular shaft.
ASSEMBLY 0F HANDLE(PIC
．
3)
1. Loose the Allen screws on the handle
．
2. Into of handle grip on the upper tube insert the multifunctional handle and
fasten-it with a bracket and 4 Allen screws(as shown)
．
3. Screw to tight
．
ASSEMBLY OF PROTECTIVE COVER(PIC.4)
Remove the Allen screws from the protective cover
．
Replace the protective
cover on the pipe shaft
．
Screw the socket head screws (A) as shown.
6. Instructions for Use
After reading the safety rules carefully. Follow the instructions below attentively
in order to get the most out of your grass trimmer.
Start off slowly, when you have gained experience. you will be able to use the
grass trimmer to its full potential.
Start the grass trimmer before getting close to the grass to be cut.