Height adjustment of Caster Wheels & Brushes
Once the brushes get worn it is necessary to adjust the height of the
brushes, i.e. how close they are to the surface to sweep. This adjustment
takes place by moving the plastic rings of the brush caster wheels. See as
follows:
1. Loosen the side knob (fig. 10.A);
2. Rotate the upper knob (fig. 10.B) in clockwise / anticlockwise to lift /
lower the small wheels;
3. Fix the side knob (fig. 10.A);
Change Attachments
If what you bought is multi-function sweeper &snow thrower, you should change the function by yourself.
Please check below steps for success assembly work.
To Separate Engine part and Attachments (Sweeper / Snow thrower head)
1. If the attachment on the machine is sweeper, please do following first:
a) Remove the B pin (fig.11 A) from the direction bar (fig.11 C);
b) Pull the direction bar (fig.11 C) out from the machine.
c) Click the direction bar (fig.11 C) into hook (fig.11 B) to avoid its moving.
If the attachment on the machine is snow thrower, please skip this step.
2. Hold the handle of the machine steadily.
3. Step the lower pedal (fig.12 A) nearby the connection according to fig.13.
15
Содержание FBAE200
Страница 16: ...16 ...
