13
14
Step 5
.
Restore the chair.
Plug the cable line in the hole a on the
power box as shown in the right picture.
Insert the plug of cable line into the socket.
(Switch on/off "O/I", press I down to turn
it on.)
In ON status, the USB port can be used for
charging mobile. Do not move the mobile
during charging.
Turn on the switch behind the power box.
Use the convenient controller built in the
armrest or the wireless controller to select
the massage function and enjoy the product
which could bring you a relax and
comfortable experience.
Switch off, chair resets to upright state.
1
2
3
1
2
3
4
4
Step 4. Install the back cushion,
pillow and controller bag.
shoulder cushion,
Connect the backrest
with the seat by zipper
and connect the front
end with the seat by
zipper.
5
6
①
②
③
④
⑤
Power box socket
Chair resetting status
▲
Back seat cushion
Head pad
Zipper position
on the back
cushion
Installation
( )
5
Installation
Installation
Installation
Installation
( )
6
Installation
Remote control pocket
Put the back seat cushion,
head pad onto the backrest and connect the
two parts with zipper and velcro.
shoulder cushion,
Warm tips
In order to get exact correct body test data for comfortable
massage effect, when you sit on the chair, please make the
bottom rim of the head pad flush with your ears before
zippering the said two parts.
Backrest
Back seat cushion
connect to upper
backrest
by
zipper
Back seat cushion
connect to the two
sides of backrest
by zipper
Head pad
Back seat cushion
Installation of back seat
cushion should pay
attention to: make the
middle part of back
cushion align to the
middle part of backrest
Make sure the switch is off before you
insert the plug of cable line into the
socket.
Connect pillow,
shoulder pad
and back-rest
with velcro.
Shoulder cushion
Shoulder cushion
Wireless controller
MENU
OK
Quick
relaxation
AUTO
5
6
Put the velcro of the controller
bag through the upper part of
the inner airbag of the left
armrest then stick it.
a
▲
USB can be used for charging when
power
on. Do not use the mobile
device during charging.
Voltage: 5V
Electric current: 1A
If the controller can't turn on or is in low battery
,
please charge it with the USB cable attached
.
USB
cable
port
USB charging
port
