Series ’90 Refrigerated Bakery
Page 10
DANGER:
Improper or faulty hookup of electrical
components in the display case can result in severe
injury or death.
ELECTRICAL INFORMATION &
GROUNDING
The Case Must Be Grounded
All case electrical connections must be performed by a licensed electrician.
All electrical wiring hookups must be done in accordance with all applicable local, regional,
or national electrical standards.
A separate circuit for each display case is recommended to prevent other appliances on the
same circuit from overloading the circuit and causing malfunction.
The electrical service must be grounded upon installation.
This unit is designed for permanent connection to a power source. See the electrical data
plate located next to electrical junction box for proper circuit size and wire ampacity.
A 7/8” diameter hole is provided in the back of the case for field wiring connections. An
access hole is also provide in the unit base for running power supply up through the floor.
See diagram below.
