Federal SN48, Инструкция по установке и эксплуатации

Страница: 9 / 26

Series ’90 Non-Refrigerated Bakery
Page 9
ELECTRICAL INFORMATION &
GROUNDING
This Case Must Be Grounded
All case electrical connections must be performed only by a licensed electrician.
All electrical hookups must be done in accordance with all applicable local, regional, or national
electrical standards.
A separate circuit for each display case is recommended to prevent other appliances on the same
circuit from overloading the circuit and causing malfunction.
The electrical service must be grounded upon installation.
This unit is designed for permanent connection to a power source. See the electrical data plate
located next to the electrical junction box for proper circuit size and wire ampacity.
A 7/8” diameter hole is provided in the back of the case for field wiring connection. An access hole
is also provided in the unit base for running power supply up through the floor. See diagram
below:
DANGER:
Improper or faulty hookup of electrical components in the
display case can result in severe injury or death.