Series ’90 Non-Refrigerated Bakery
Page 12
Light Replacement
The light fixtures use a spring loaded socket on one end. To remove light, push the bulb toward the
spring-loaded socket until the opposite end drops out of the socket.
The bulbs are furnished with plastic safety light shields. Make certain the light shields are always
in place to safeguard against bulb breakage.
When replacing lights, use direct equivalents to original bulbs.
Shelves
The shelves are adjustable up and down in 2” increments. To reposition the shelves:
1.
Turn the shelf lights off.
2.
Unplug the shelf light cord.
3.
Remove all shelves from the shelf supports.
4.
Grasp the shelf support at each end.
5.
Tip the front of the shelf support up until it can be removed from the shelf standard.
6.
Reposition the shelf as desired.
The shelves can be installed horizontally or slated at 5. To change the shelf slant:
1.
Remove the shelves from the shelf support.
2.
Grasp the shelf support at each end.
3.
Lift the shelf support up at the back until the brackets can be repositioned in the shelf
standard slots. See diagram below:
Содержание SN48
