Page 15 of 40
4.
Place the front of the glass shelf onto the front shelf support.
5.
Set the rear side of the glass shelf onto the rear shelf support so that the glass shelf retainers straddle the
rear shelf support.
6.
Repeat steps 2 & 3 for each tier.
6.3
OPTIONAL SHELF LIGHTS - ELPRSS
1.
Install shelves as described in the Metal Shelves Installation and Glass Shelves Installation sections in this
manual. Note: On models with glass shelves with lights, a shelf support will be placed on the back and
front of the shelf bracket.
2.
Remove the cap from the appropriate female light sockets.
3.
Plug in each shelf light by plugging the male plug on the appropriate shelf light cord plugs with the female
light sockets and push together.
Shelves and shelf light quantity
It is not required that all shelves and shelf lights supplied with each case are used. The quantity of shelves and
shelf lights can be tailored to your specific needs. If the supplied quantity of shelves and shelf lights are not
required, cap unused female socket located in interior of the case mullion with caps supplied.