Page 14 of 40
3.
On the LPRSS case with (2) shelves place the shorter top shelf on top of the shorter top shelf brackets
with the flanges on each end of the shelf overhanging the outside of the bracket. Place the front tab of
the shelf bracket into the notch located on the front of the shelf.
4.
If shelf includes optional light (ELPRSS), plug the cords into the plug receptacle located toward rear of
case.
6.2
GLASS SHELVES
SHORTER GLASS TOP SHELF
LONGER GLASS BOTTOM SHELF
SHORTER TOP SHELF BRACKETS
LONGER BOTTOM SHELF BRACKETS
SHELF BRACKET FRONT TAB
SHELF SUPPORT
SHELF SUPPORT
SHELF SUPPORT, LONG CORD WHEN SUPPLIED
WITH SHELF LIGHT OPTION.
CORD RETAINER CLIP ON THIS SIDE
WHEN ORDERED WITH SHELF LIGHT OPTION
GLASS SHELF RETAINER CLIPS.
MUST INSTALL TO GLASS
GLASS SHELF RETAINER
CLIP LOCATED IN FAR
CORNER OF GLASS SHELF.
(FIELD INSTALLED TO GLASS
BOTTOM)
TOP VIEW
CLEAR PRODUCT STOP
CLEAR PRODUCT STOP
CLEAR PRODUCT STOP
(FIELD INSTALLED TO
GLASS FRONT LIP)
GLASS SHELF RETAINER CLIP
1.
When installing for the first time, attach (2) glass shelf retainers to each glass shelf. Remove the backing
from the tape located on the flat side of the glass shelf retainer. Position the glass shelf retainer in the (2)
far corners of the glass as shown in the above figure. Repeat for each glass shelf.
NOTE: Clean the area of glass where the glass shelf holder is to be located with isopropyl alcohol and let
it air dry before installing the glass shelf holder.
2.
When installing for the first time attach (1) clear glass product stop to each glass shelf as shown in the
figure above. Align the clear product stop edge with the edge of the
glass and push the “U” portion
of the
glass product stop onto the glass lip across the entire front of the glass. Repeat for each glass shelf.
3.
Install the shelf brackets into the shelf standard
as described in Step (1) of “Metal Shelves Installation” of
this manual.
