Federal ITH, Инструкция по установке и эксплуатации

Страница: 9 / 32

E3788-1 Rev A - ITH 9
(6) COMPARTMENT PANEL REMOVAL
Floor Base Models Back Panel
REAR BASE PANEL
REAR BASE PANEL
SCREWS
1. Remove screws located in each lower corner of panel.
2. Remove screws located on top of panel under the base cross member.
3. Pull top of panel outward until lip on bottom of panel clears bottom of base and remove
from case.
Front Panel
FRONT PANEL
SCREWS
FRONT PANEL
FRONT PANEL
SCREWS
TOP PANEL
RETAINER
1.
Disconnect power to Display Case.
2.
Remove (2) front panel phillip head screws from each lower corner of front panel (1) is
located on front of panel and the other under the recess behind trim strip. Do not remove
the screws holding trip strip to front panel.
3.
Slide the front panel down until it slides out of the top panel retainer lip at the top of the
panel.
4.
Install panel in reverse order.