IMSS E3265
- 20 -
SHELVES (4)
DISPLAY DECK
FAN SHROUD
FAN SHROUD
FAN SHROUD
RETAINER SCREWS (2)
DISPLAY DECK
DISPLAY DECK
DISPLAY DECK
TOWER SIDE PANEL
LATCH (4)
TOWER SIDE PANEL
TOWER INNER PANEL
(THERE IS NO INNER PANEL
ON IMSS84 MODEL)
ILLUSTRATION IS TYPICAL,
SOME MODELS MAY HAVE MORE PANELS, SHELVES AND DISPLAY DECKS
1. R
emove interior shelving from unit as described in the “Shelving Installation and
Removal” section of this manual.
2. Dip rag in warm soapy water and ring out thoroughly. Clean all shelves and shelf
brackets and dry with soft dry towel.
3. Remove tower side panels by lifting (4) latch levers and pulling tower side panel out
away from tower.
4. Remove the tower inner panel by lifting panel up until retaining pins clear key slots
hole. Pull panel out of tower.
5. Dip rag in warm soapy water and ring out thoroughly. Clean the tower side panels,
tower inner panels and inside both tower ends. Dry with soft dry towel
6. Lift the display decks up and out of evaporator tub.
7. Remove the fan shroud assembly by removing (4) retaining screws from the outer
flange and the (2) from the inner flange. Lift the fan shroud assembly and reach in
and unplug the evaporator fan motor cord(s). Lift fan shroud assembly out of tub.
8. Clean the display deck(s) using warm soapy water and a brush. Rinse thoroughly
and allow dry. Wipe off fan shroud assembly (do not rinse or submerge fan motors).
9. Clean the entire interior of the case using warm soapy water. Wipe off all soapy
water with a damp cloth and allow to dry. (DO NOT use solvents such as Acetone,
Benzene, Carbon Tetrachloride, and Lacquer Thinners)
10.
IMPORTANT: Cleaning the clear acrylic plastic front air deflector. Clean
as described in “Acrylic Air Deflector Cleaning” section of this manual
.
11. Reassemble all components in reverse order.
NOTE: Depending on the amount of usage and spillage of foreign material, some
fasteners may have to be removed and parts disassembled to allow proper cleaning of
the unit.