DO NOT TOUCH
THE GLASS PORTION
OF LAMP
LAMP
SOCKET
290A5274
Figure 3.
290A5275
MOTOR
REFLECTOR
STRAIGHT EDGE OF
LAMP BASE
SLIDE CLIP
OVER LAMP
INSERT LAMP WITH STRAIGHT
EDGE OF LAMP BASE TOWARD
REFLECTOR
Figure 4.
a.
Rotate the reflector until the C-clip
(located at the base of the lamp) can be removed, and
remove the C-clip by sliding it away from the reflector.
b.
See figure 4. Note the lamp’s orienta-
tion and replace the lamp (Federal Part No. 8440A265)
with the straight edge of the lamp’s base toward the
reflector.
c.
Reassemble the light.
-4-
D.
Cleaning Reflectors and Mirrors.
Use a soft tissue to clean the reflector and
mirrors. Avoid heavy pressure and the use of caustic or
petroleum base solvents which will scratch or dull the
surface.
Copyright 2005 Federal Signal Corporation
