C. Connect the black lead to chassis ground.
D. Connect the other side of the fused wires to the
+12VDC supply.
NOTE
Any of the light assembly functions can be
activated by applying 12VDC to the appropriate
control line. The heavy black lead (-) must be
connected to vehicle ground, to perform a
function check.
E.
Programming High-Side flasher.
WARNING
DO NOT connect flasher to brake light
circuit of ANY vehicle.
DO NOT connect flasher to the headlight
circuit of any vehicle.
Connection of aftermarket electrical
equipment into this circuit may interfere
with the brake shift interlock.
This could cause the vehicle to unexpect-
edly move forward causing possible prop-
erty damage, injury or death to the vehicle
operator or others.
The flasher will provide the end user with a
preselected flash pattern. The preselected flash pattern
is to be chosen from the nine factory programmed
patterns provided with each flasher. It is recommended
that the preselected flash pattern be determined and
programmed during installation.
The red/green LED in each flasher will be
illuminated green when an SAE approved flash pattern
is selected. When an unapproved SAE flash pattern is
selected, the LED will be illuminated red. The red/green
LED may alternate between red and green for several
flash patterns.
The following procedure demonstrates the
programming and operating features of the flasher:
290A5271
(+) TO
POWER/IGN
(-) TO GND
RED
RED
ACCESSORY
CABLE
ACCESSORY
CABLE
INTERNAL WIRING
EXTERNAL WIRING
BLU
BLU
GND
GND
POD 1
POD 8
B+
B+
B+
B+
B+
B+
B+
B+
POD 2
POD 7
POD 3
POD 6
POD 4
POD 5
BRN
POD 8
POD 7
POD 6
POD 5
POD 4
POD 3
POD 2
POD 1
10A
10A
10A
10A
10A
STEADY BURN
10A
10A
10A
10A
10A
BRN
BRN/WHT
BRN/WHT
YEL
YEL
STEADY
BURN
BLK
BLK
CUSTOMER
SUPPLIED
SUPPLIED WITH
LIGHTBAR
STEADY
BURN
Figure 1.
-2-
290A5330
(+) TO
POWER/IGN
(-) TO GND
RED
RED
ACCESSORY
CABLE
ACCESSORY
CABLE
INTERNAL WIRING
EXTERNAL WIRING
YEL
YEL
GND
GND
POD 1
B+
B+
B+
B+
B+
B+
POD 6
POD 2
POD 5
POD 3
POD 4
BRN/
WHT
SPARE
STEADY BURN
POD 6
POD 5
POD 4
POD 3
POD 2
POD 1
10A
10A
10A
10A
10A
SPARE
STEADY BURN
10A
10A
10A
10A
10A
BRN/
WHT
BLU
BLU
BRN
BRN
N.C.
STEADY
BURN
STEADY
BURN
N.C.
NOT USED
BLK
BLK
CUSTOMER
SUPPLIED
SUPPLIED WITH
LIGHTBAR
