background image

SECTION XII - WARRANTY & TECHNICAL SUPPORT

Page 13

UNITROL

 products described in this Manual are warranted to be free from defects in material and

workmanship for five years from installation date.Any product found to be faulty will, at the factory’s

option after inspection, be replaced or repaired and returned without charge.

The Warranty does not cover any charges which may be incurred for removing a suspected defective

unit, returning the suspected defective unit to the factory or for installing a replacement unit.

The Warranty does not cover units that have been tampered with or on which unauthorized repairs or

modifications have been made nor does it cover units that have been abused or used beyond limits

stated in specifications.

FIVE-YEAR WARRANTY & LIMITATIONS

TECHNICAL SUPPORT

The easiest way to solve a 

UNITROL

 problem is to phone the factory. Outside California call toll-free

1-800-854-3375

. Inside California, call 

(714) 871-3336

. Our office is open Monday through Friday

8:00 AM to 4:30 PM 

Pacific Standard Time.

 We recommend that any suspect unit be returned to the factory for repair whether it is in Warranty

or not. Technicians have constantly updated information and components.

Please include a brief description of the problem along with your 

name and phone number

 so we may

contact you in the event bench tests do not reveal the in-vehicle problem.

Содержание Unitrol 280 Series


















Отзывы: