8
SLR LED Rotator Beacon
Federal Signal www.fedsig.com
Overview
Overview
The SLR LED Rotator Beacon provides a reliable signal with three
selectable RPM speeds. Models are available with flush or pipe
mounting. The available colors are red and amber. The light can
operate on a 12- or 24-volt power source.
Unpacking the Product
After unpacking the product, inspect it for damage that may have
occurred in transit. If it has been damaged, file a claim immediately
with the carrier, stating the extent of damage. Carefully check all
envelopes, shipping labels, and tags before removing or destroying
them.
Preparing for the Installation
To prepare for the beacon installation, assemble these installer-
supplied materials:
• 18 AWG (1 mm
2
) red and black wire for lengths up to 15 feet (5 m)
or minimum 16 AWG (1.5 mm
2
) wire for lengths greater than 15 feet
(5 m). For extending wires from the installer-supplied switch,
20 AWG can be used if required.
• Fuseholder with 5 A fuse
• Two to three insulated butt connectors for the pipe mounting
option and a switch with a current capacity of at least 5 A.
• For the option of permanently mounting the beacon, three #10
pan head thread-forming screws and a #18 drill. For extreme
vibration conditions, use three #10-32 machine screws with #10
hex nuts and lockwashers for clearance holes.
• For the option of pipe mounting the beacon, a 1-inch, threaded
NPT pipe.
• An installer-supplied bushing for the wiring is optional.
Selecting a rotation speed is optional and should be done during
the installation. For more information, see “Selecting a Rotation