manualshive.com logo in svg
background image

290A5170

LENS

LIGHT

ASSEMBLY

REMOVE 2
TORX SCREWS

PULL LENS STRAIGHT AWAY

FROM LIGHT ASSEMBLY

CAUTION

THE USE OF LONGER SCREWS MAY DAMAGE

THE CIRCUIT BOARD ASSEMBLY.  USE THE 

PREVIOUSLY REMOVED SCREWS WHEN

REPLACING THE LENS.

Figure 4.

290A5185

LIGHT ASSEMBLY

LED MODULE

REMOVE TWO TORX

HEAD SCREWS

PULL THE LED MODULE
STRAIGHT AWAY FROM
THE LIGHT ASSEMBLY

Figure 5.

 

B. 

Lamp Replacement.

Use of higher wattage lamps can result in damage to the 

colored lenses.

 

 

1.  See figure 4. Remove and retain the two screws 

which secure the lens. Carefully pull the lens straight away from 

the light assembly.

Service life of lamp will be shortened if glass is touched. 

If glass has been handled, clean with a grease solvent.

A serious injury may result if lamp is touched 

when hot. Always allow lamp to cool before remov-

ing. Halogen lamps are pressurized and if broken 

can result in flying glass. Always wear gloves and 

eye protection when handling the lamps.

 

 

2.  Remove the defective lamp by carefully pulling it 

out of the socket. Install a new lamp by aligning the pins on the 

lamp base with the holes in the socket, and carefully pushing the 

lamp into the socket.

Use of longer screws may damage the circuit board as-

sembly. Use the previously removed screws when replac-

ing the lens.

 

 

3.  Replace the lens using the previously removed 

screws.

 

C. 

LED Module Replacement.

This product contains high intensity LED devices. 

To prevent permanent eye damage, DO NOT stare 

into the light beam at close range.

 

 

1.  See figure 5. Remove and retain the two screws 

which secure the LED module assembly.

 

 

2.  Disconnect the right angle connectors and remove 

the LED module assembly.

 

 

3.  Observing polarity, connect the right angle connec-

tors to the appropriate printed circuit board connectors.

 

 

4.  Install the new LED module assembly using the 

previously removed screws.

VI.  REPLACEMENT PARTS.

Description   

 

Part No.

Lens, Clear   

 

8573001

Lens, Red 

 

 

8573001-01

Lens, Amber   

 

8573001-02

Lens, Blue 

 

 

8573001-03

Lens, Green   

 

8573001-04

Lamp, 27-watt halogen, 

8573007

  G.E. GH-22, 12V

Lamp, 20-watt halogen, 

8573085

  G4 Bi-Pin, 24V

LED Module Assy, White, 12V 

8573229

LED Module Assy, Red, 12V 

8573229-04

LED Module Assy, Amber, 12V 

8573229-05

LED Module Assy, Blue, 12V 

8573229-06

LED Module Assy, White, 24V 

8573229-07

LED Module Assy, Red, 24V 

8573229-08

LED Module Assy, Amber, 24V 

8573229-09

LED Module Assy, Blue, 24V 

8573229-10

VII.  SERVICE.

 

Communication and shipments should be addressed to:

 

 

Service Department

 

 

Federal Signal Corporation

 

 

2645 Federal Signal Drive

 

 

University Park, IL 60466

 

 

1-800-433-9132

Copyright 2007 Federal Signal Corporation

-4-

Отзывы: