Safety Messages for Installers and Operators
7
Installation and Maintenance Instructions
Federal Signal
www.fedsig.com
• When drilling into a vehicle structure, ensure that both sides of the surface are
clear of anything that could be damaged. All drilled holes should be deburred
and all sharp edges should be smoothed. All wires going through drilled holes
should be protected by a grommet or convolute/split-loom tubing. All exterior
drilled holes must be sealed with Motorcraft seam sealer T-A-2-B or equivalent
to prevent the potential exposure to carbon monoxide or other potentially
harmful fumes. Failure to observe this warning could cause serious injury or
death.
After Installation
• After installation, test the siren and light system to ensure that it is operating
properly.
• Test all vehicle functions, including horn operation, vehicle safety functions, and
vehicle light systems, to ensure proper operation. Ensure that installation has
not affected vehicle operation or changed any vehicle safety function or circuit.
• After testing is complete, provide a copy of these instructions to the
instructional staff and all operating personnel.
• File these instructions in a safe place and refer to them when maintaining or
reinstalling the product.
Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death.
RETAIN AND REFER TO THESE MESSAGES
