Testing the Installation
25
Installation and Maintenance Instructions
Federal Signal
www.fedsig.com
Table 8 Pathway Input Default Programming
Button
Default Function
Ignition
System Enable
Park
Siren Mute
White Light Cutoff (LB/ILS/CNSM)
Horn Ring
Siren Tone Override/Control
Input 1
Remote SSW1 Activation
Input 2
Remote SSW2 Activation
Input 3
Remote SSW3 Activation
Input 4
Button 2, Step 2 On (Flood)
Horn Ring Operation
• Rotary Position Wail and SSW3 - 8-second Yelp tone
• Rotary Position Yelp and SSW3 - 8-second Priority tone
• Rotary Position HF and SSW3- Step through Wail, Yelp, Priority, double tap horn
to turn off
• Rotary Position Standby and SSW3 - Momentary Air Horn override
• Rotary Position Tone1 and SSW3 - 8-second HI-LO tone
• Rotary Position Tone2 and SSW3 - 8-second HI-LO tone
• Any Tone Rotary Position and SSW2 - Momentary Air Horn override.
• When any tone is selected and PARK is enabled: Momentary Air Horn
NOTE:
Horn Ring is transferred in SSW2 and SSW3, and horn presses will activate
siren tones only in these slide positions. SSW off or SSW 1 will run the normal car
horn on a horn press.
Dim Button Operation (BTN 4)
• Light bar dimming will not turn on if in SSW3. If BTN 4 is active (ON), and SSW 3
is then selected, BTN 4 will be turned OFF.
