background image

iii

 

 

 

LIMITED WARRANTY 

 

The Signal Division, Federal Signal Corporation (Federal), warrants each new product to be free 

from defects in material and workmanship, under normal use and service, for a period of two years 

on parts replacement and one year on labor from the date of delivery to the first user-purchaser. 

 

During this warranty period, the obligation of Federal is limited to repairing or replacing, as 

Federal may elect, any part or parts of such product, which after examination by Federal discloses 

to be defective in material and/or workmanship. 

 

Federal will provide warranty for any unit which is delivered, transported prepaid, to the Federal 

factory or designated authorized warranty service center for examination and such examination 

reveals a defect in material and/or workmanship. 

 

This warranty does not cover travel expenses, the cost of specialized equipment for gaining access 

to the product, or labor charges for removal and re-installation of the product. Batteries are not 

covered under warranty. 

 

This warranty does not extend to any unit which has been subjected to abuse, misuse, improper 

installation or which has been inadequately maintained, nor to units which have problems relating 

to service or modification at any facility other than the Federal factory or authorized warranty 

service centers. 

 

THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. IN NO EVENT SHALL FEDERAL BE LIABLE FOR ANY LOSS OF 

ROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH 

DEFECT IN MATERIAL OR WORKMANSHIP. 

   

 

 

 

 

 

 

IMPORTANT NOTICE: 

Federal Signal reserves the right to make changes to devices and specifications detailed in this 

manual at any time in order to improve reliability, function or design.  The information in this 

book has been carefully checked and is believed to be accurate; however no responsibility is as-

sumed for any inaccuracies. 

 

Содержание MOD1004


















Отзывы: