11
Installation and Maintenance Instructions
LED Traffic Clearing Light Model LEDTCL97
Cleaning the Lights
CRAZING/CRACKING Crazing (fine cracks) of lenses causes
reduced effectiveness of the light. Do not use cleaning agents
(which causes crazing) such as strong detergents, solvents,
or petroleum products. If crazing of the lens es does occur, the
reliability of light for emergency signaling purposes may be reduced
until the lenses are replaced.
NOTICE
CLEANING the POLYCARBONATE LENSES
:
To extend the life of this
device, periodic cleaning is necessary. Clean the lens with a mild,
non-abrasive, neutral-pH cleaning agent and a soft, clean cloth.
Rinse the device thoroughly to ensure that no cleaning agent residue
remains. To avoid water spots, dry the device with a soft clean cloth.
Failure to follow this precaution can cause crazing or cracking of the
lens/dome and voids the warranty claims for the light.
Getting Technical Support
For technical support, please contact:
Federal Signal Corporation
Phone: 1-800-443-9132
Fax: 1-800-343-9706
Email: [email protected]
Getting Repair Service
The Federal Signal factory provides technical assistance with
Any units returned to returned to Federal Signal for service,
inspection, or repair must be accompanied by a Return Material
Authorization (RMA). Obtain an RMA from a Local Distributor or
Manufacturer’s Representative. Provided a brief explanation of the
service requested or the nature of the malfunction.
Address all communications to the following address.
Federal Signal Corporation
Service Department
2645 Federal Signal Drive
University Park IL 60484-3167
