Figure 6. Speaker Driver and Cone Replacement.
2.
Unscrew the cone, being careful not to
lose the five (5) washers.
3.
Unscrew the wirenuts which connect
the driver lead wires to the light assembly feed wires.
4.
Remove the two (each) 1/4-20 screws,
washers and lockwashers which secure the driver to
the housing.
5.
Remove the driver, being careful not to
lose the two (2) washers.
6.
Remove the leads from the old driver
and connect to the new driver. 58-watt driver must
be unsoldered and then re-soldered.
7.
Reinstall the driver. Ensure that
washers are installed correctly (see figure 5). Recon-
nect the driver lead wires to the light assembly feed
wires. Secure connections with wirenuts.
8.
Reinstall cone. Ensure that washers
are installed correctly (see figure 6).
9.
Replace grille and rear cover (removed
in step 1).
290A1774-12
DRIVER
CONE
SPEAKER
HOUSING
VELUTEX
WASHER (1)
VELUTEX
WASHERS (2)
NEOPRENE RUBBER
WASHERS (3)
CAD. PLTD STEEL
WASHER (1)
-6-
